About UsContact UsHome

Metal Tree Guards

Workshop

types of tree guard



Quarter Guard: Height: 110cms (3ft 7inches) Diameter 40cms (1ft 4 inches) Weight 20 Kgs (approx)

quarter tree guard

Our Smallest Tree Guard. An economic and attractive way of protecting smaller saplings. Strong welded steel construction . The upright gaps are no greater than 9.4cms . Each iron tree guard is split able (scroll down the page for fitting instructions) for easy fitting to existing trees and re-use. All Joins are stock friendly with no tabs for animals to catch themselves on. Supplied with three ground stakes that bolt to the tree guards for solid ground fixing and all nuts and bolts.

Unpainted (Rust Finish) £39.50 + Vat
Painted £45.00
+ Vat
Galvanized £52.50
+ Vat
Galvanized & Painted £59.50
+ Vat



Half Guard: Height : 110cms(3ft 7inches) Diameter: 63cms(2ft 1inches) Weight: 29kgs (approx)

half tree guard 1

With strong welded steel construction these metal tree guards provide decorative protection for saplings and smaller trees. The  upright gaps are no greater than 9.4cms these steel tree guards are suitable for sheep & smaller stock animals. Each iron tree guard is split able (scroll down the page for fitting instructions) for easy fitting to existing trees and re-use. All Joins are stock friendly  with no tabs  for animals to catch themselves on. Supplied with three ground stakes that bolt to the tree guards for solid ground fixing and all nuts and bolts.

Unpainted (Rust Finish) £59.50 + Vat
Painted £69.50
+ Vat
Galvanized £84.50
+ Vat
Galvanized & Painted £94.50
+ Vat



Three Quarter Guard: Height 195cms (6ft 5inches) Diameter 40cms (1ft 4inches) Weight 30kgs (approx)

three quarter tree guard

A slimmer, Elegant and less costly version of this classic iron tree guard is perfect for farms, public & private parks and gardens. With welded steel construction they are perfect for newly planted trees with a small trunk.. The upright gap spacing is no more than 9.4cms. All joins are stock friendly. Each metal tree guard is split able (scroll down page for fitting instructions) for fitting to existing trees and re-use. Supplied with all nuts and bolts and three ground stakes that bolt to the bottom ring for secure ground fixing.

Unpainted (Rust Finish) £65.50 + Vat
Painted £75.00
+ Vat
Galvanized £89.50
+ Vat
Galvanized & Painted £99.50
+ Vat



Full Guard: Height: 195cms (6ft 5inches) Diameter: 63cms (2ft 1inches) Weight: 50kgs (approx)



This classic iron tree guard is perfect for farms, public & private parks and gardens. With welded steel construction they are strong enough to withstand the rigours of horse & heavy stock. The upright gap spacing is no more than 9.4cms and suitable for sheep and small stock animals. All joins are stock friendly. Each metal tree guard is split able (scroll down page for fitting instructions) for fitting to existing trees and re-use.  Supplied with all nuts and  bolts and three ground stakes that bolt to the bottom ring for secure ground fixing.

Unpainted (rust finish)  £89.50 + Vat
Painted  £95
+ Vat
Galvanized £125
+ Vat
Galvanized & Painted £139.50
+ Vat


Hoop & Post Tree Guards: Unpainted £245 + VAT   Painted £270 + VAT

hoop guard 1

hoop guard 2

Splitable . Made with either round or flat hoops to match our 2 styles of estate fencing this steel tree guard stands 1.15 meters tall (3ft 9"), has a diameter of 1.8 meters (6ft approx) and is supplied with nuts and bolts and 8 iron stays for ground fixing. Height options available £POA.

Estate Tree Guard: Height 150cms (5ft approx) Diameter Top Ring 280cms (9ft approx) Diameter Trunk 180cms (6ft approx) Weight   112kgs approx

Estate Tree Guard

A terrific feature and the ultimate in tree protection against horse and all small and heavy stock. Standing 160cms (5ft3") tall, they boast a 20mm solid top ring, 5 stock spaced 25x8mm rings (spaced to match our ), 40x8mm posts, all fully welded and painted on site, this iron tree guard can be made large enough to prevent animals reaching your trees and strong enough to withstand rubbing. These metal guards are fabricated by our team on site and can be made to any diameter/ circumference.

Standard sizes are:
2.8m diameter / 9m circumference
3.8m diameter / 12m circumference
4.7m diameter / 15m circumference
5.65m diameter / 18m circumference

POA


Park Guard : Height 190cms (6ft 3inch approx) Trunk diameter 110cms (3ft 7inch approx) Weight 80kg

Park Guard

This iron tree guard is a taller, slimmer version of the Estate Guard and offers great protection against all stock. Although the trunk is slimmer the ring spacing is tighter. With a 20mm round  solid top ring, 7 stock spaced 25x8mm rings, six  40x8mm posts, all fully welded,  this  metal tree guard is splitable for easy fitting, moving and re-use. It comes with 6 ground stakes that are hammered into the ground and bolt to the posts. Please scroll to the bottom of the page for fitting instructions.

Un painted (Rust Finish) £199 + vat
Painted £225 + vat
Galved £249 + Vat
Galved & Painted £275 + vat

Feature Tree Guards:

BRUNHILD (Armoured warrior woman)

feature tree guard


feature iron tree guard detail
Currently the most elegant of our tree guard range. Standing a little over 6 ft (185cm) tall with a top and bottom ring circumference of 4 ft approx (115 cm) and a 2 ft approx (60 cm) waist, she is perfect protection for new and established trees. Weighing 70 kgs  and supplied with four iron stays for fixing.

Crown Options and prices:

s

Plain Crown:
Unpainted £325 + Vat
Painted £349 + Vat
Galvanized £399 + Vat
Galvanized & Painted £425 + Vat

s

Decorative Crown:
Unpainted £375 + Vat
Painted £399 + Vat
Galvanized £449 + Vat
Galvanized & Painted £475 + Vat

Available Finishes:

Unpainted rust finish: Structurally these guards will never corrode away in any customer life time. Within 6 months they will be a lovely organic rusty brown,  very much in vogue , beautifully blending into a country environment and completely maintenance free.

Painted: A tough hard wearing satin black,  high Zinc based, primer / top coat  Also available  in a specified RAL colour (colours other than black will affect published  price).

Galvanized: Hot dip galvanized tree guards. Maintenance free.

Galvanized and Painted: Hot dipped galvanized , acid etch primed and then given a tough hard wearing satin black,  high Zinc based, primer / top coat . Also available  in a specified RAL colour (colours other than black will affect published  price).


Fixing your Iron Tree Guards:

Half, Full Guards and Brunhild

Bolt the 2 halves of you tree guards together around your tree. Once in place align a stay with one of the bolt holes in the base of the tree guard  and bang into the ground, bolt to the tree guard and repeat until all three stays are in place.

Fit the two halves of the tree guard around the treeInsert bolts and tighten
hammer the stays into the ground then bolt to the base of the tree guard Stand back and admire!

Hoop & Post, Estate and Park Guards

Bolt the 2 halves of your tree guard together around your tree. Stamp legs into the ground an inch or so. Split tree guard and remove. Bang a stay into each of the indents made by the legs and using a lazer or spirit level make sure all the 8 stays are the same height then replace your tree guard and bolt to stays.






32 of our Brunhild Guards forming a spectacular avenue of trees leading to a country church.



Decorative planters standing 2.5 meters tall and 60 cms in diameter. In stock  and available @ £495 each + Vat



Eal basket planters standing 2.7 m tall and 95 cms diameter at base in stock and available @  £225 + Vat

tree guard delivery

120 large tree gaurds leaving our yard for an estate in Hampshire. The customer chose and specified the colour.





© Copyright Designer Metal (Suffolk) Limited 2013. All Rights Reserved

Links | Website by i-Design.net